Do-It-Yourself Industrial Epoxy Flooring System.
Just Mix & Pour!
ONE EPOXY FOR OVER 100 FLOORING
WITH EPOXTEX® CLEANER
STEP #1 - The most important part of your floor coating
process. Prepare the surface by sweeping & vacuuming the floor. Clean
floors with Epoxytex®
Cleaner removing oils and grime. Wash & Vacuum. Allow to
PRIME FLOOR WITH EPOXTEX ® PRIMER
STEP #2 - After a thorough cleansing of the your floor
and making sure there is no foreign matter left, apply EpoxyTex®
at 200-250 Sq.
Ft per Gallon using a 1/4" nap roller. Allow to dry for no
more than 18 hours.
COAT FLOOR WITH EPOXTEX ® TOPCOAT
STEP #3 - Commence application of our easy to use EpoxyTex®
Pour-N-Spread. This No VOC, 100% Solids is
applied by simply Pouring mixed product into small 4" strips
along the floor and spread using a 1/4" nap roller. Simply
pour and spread. EpoxyTex®
is self-leveling and
will produce an even floor.
►YOU'RE DONE! CONGRATS
Congratulations!!!. You have just installed your very first
system and have saved a ton of money doing it yourself. Epoxy floors are hard to install but
EpoxyTex ® flooring products
have been designed with one thing in mind: EASE OF APPLICATION! Everything
is pre-measured. We sell all the tools to make your life
If you can use a roller then you can apply our epoxy. Many
in-house maintenance and janitorial personnel have applied
Epoxytex ® coatings themselves and saved $$$. It's that
simple! Give us a call today at 516-624-9774 and let us
can help you beautify your plant. Our products
offers excellent chemical & abrasion resistance can be
used throughout your plant floor from turbine floors,
garages, battery rooms, chemical rooms, ramps etc.
For a complete list please see our technical data sheet
PO BOX 548
SYOSSET NY 11791